Magnetic Balance 2000A Hall Effect Current Transducer

Détails sur le produit:

Conditions de paiement et expédition:

Quantité de commande min:	100
Détails d'emballage:	Emballage original
Délai de livraison:	1-12 semaines
Conditions de paiement:	T/T

Contact

Description de produit détaillée

IPN actuel de mesure évalué (a):	2000	IP de chaîne de mesure (a):	0~±3700
Tourne le rapport:	1:5000	Tension d'alimentation électrique VC (v):	× DE DC± (15~24) (1±10%) V
Sortie évaluée ISN (mA) de mesure:	400mA	Consommation actuelle IC (@±24V) de côté secondaire:	≤35mA+
Tension de tenue d'isolement:	12kVrms/50Hz/1min	ΔL de linéarités (@IPN, TA=25℃):	≤±0.1%
Surligner:	2000A Hall Effect Current Transducer , Magnetic Balance Hall Effect Current Transducer

NT2000C-S/SP1( NACL.2000B1-S4 ) current sensor

Product Details

product manual

The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.

product advantages	Applications	Reference standard
High precision	AC inverter AC	EN50178 EN50155
Good linearity	Battery powered
Low temperature drift	Converter/Inverter
Broadband	UPS/SVG
Quick response

Main electrical parameters
Rated measuring current IPN (A)	2000
Measuring range IP (A)	0～±3700
Turns ratio	1:5000
Power supply voltage VC (V)	DC ± (15 ~ 24) × (1 ± 10%) V
Rated measurement output ISN (mA)	400mA
Measuring resistance RM (Ω)
70℃ 85℃ @ ± 15V, ± 2000A: 0Ω ~ 7.5Ω @ ± 15V, ± 2400A: 0Ω ~ 4Ω @ ± 24V, ± 2000A: 3Ω ~ 27.5Ω @ ± 24V, ± 3700A: 0Ω ~ 3Ω
Secondary side current consumption IC (@±24V)	≤35mA+
Isolation withstand voltage	12kVrms/50Hz/1min

Accuracy-dynamic parameters
Basic error δi (@IPN,TA=25℃)	≤±0.4%
Linearity δL (@IPN,TA=25℃)	≤±0.1%
Zero output current IO (@IP=0, TA = 25℃)	≤ ± 0.5mA
Zero temperature drift IOT	≤ ± 0.8mA (-50 ℃ ~ + 85)
Response time	≤1µS
di/dt accuracy	＞100A/us
Frequency bandwidth BW	DC..100kHz

General data
Working temperature Ta	-40℃~+85℃
Storage temperature Ts	-45℃~+90℃
weight	≤1700g

Magnetic Balance 2000A Hall Effect Current Transducer 0

Mechanical characteristics
No tolerance	±1 mm
Sensor installation method one (recommended)	4 hole ø6.5mm 4 M6 steel screws
Recommended torque	4.5 N·m
Busbar size (recommended)	Ø60.5mm
Secondary side electrical connection	(RVVP3×16/0.15)

Remarks

1. When the measured current direction is consistent with the direction marked on the sensor, the sensor output ISN is positive.
2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V.
3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard.
4. The flatness requirements for the installation surface of the power sensor:
(a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm);
(b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm);
5. No tolerance ±1mm is noted;

Produit Tag:

Personne à contacter: Miss. Elaine

Téléphone: +86 18150151931

Télécopieur: 86-592-2611505

Autres Produits

Dérive de la température d'UPS SVG Hall Current Sensor With Low

Haute précision: C.A. d'inverseur à C.A.

Bonnes linéarités: à piles

Dérive de basse température: Convertisseur/inverseur

À bande large: UPS/SVG

Inverseur 50A Hall Effect Current Transducer à C.A.

IPN actuel de mesure évalué (a): 50

IP de chaîne de mesure (a): 0~±70

Tourne le rapport: 1:1000

Tension d'alimentation électrique VC (v): +/-12V~+/-15V (+/--5%)

7kV Hall Current Sensor EN50178 avec la dérive de basse température

IPN actuel de mesure évalué: 1000A

Chaîne de mesure IPM: ±2000A

Tension d'alimentation électrique VC: × DE DC± (15~24) (1±5%) V

Consommation actuelle IC (@±24V): ≤±30mA+ISN

GB/T 25119 13.4kV 2400A Hall Effect Current Transducer

IPN actuel de mesure évalué: 1000A

Chaîne de mesure IPM: ±2400A

Tension d'alimentation électrique VC: × DE DC± (15~24) (1±5%) V

Consommation actuelle IC (@±24V): ≤±30mA+ISN

1us réponse 1000A Hall Effect Current Sensor EN50178

IPN actuel de mesure évalué: 1000A

Chaîne de mesure IPM: ±2100A

Tension d'alimentation électrique VC: × DE DC± (15~24) (1±10%) V

Consommation actuelle IC (@±24V): ≤±35mA+ISN